W.D. Tehnik d.o.o.

Podjetje za proizvodnjo in trgovino

Stepišnikova ulica 12, Slovenska Bistrica

Tel.: 02/8401-701, 8401-700

Fax.: 02/8181-073

E-mail: wd-tehnik@siol.net

TITLE Unit ML-600S
CAPACITY Swing over bed mm 580
Max machining diameter mm Ø360 / Ø410
Max. machining length mm 700
Slat angle of bed 45°
TRAVEL X- axis mm 235
Z-axis mm 700
SPINDLE Max spindle speed rpm 3500 (op. 3000)
Spindle type ASA A2-8
Diameter of spindle bore mm Ø86 (op.Ø105)
Bar capacity mm Ø75 (op. Ø91)
Hydraulic chuck mm Ø250 (op.Ø300)
FEEDRATE Rapid feedrate on X- axis m/min 30
Rapid feedrate on Z- axis m/min 30
Guideways type linear ball guideways
TOOL TURRET Type hydraulic (direct indexing)
Tool capacity 12 (op. 8, 10)
Tool shank post mm 25 x 25
Boring diameter post mm Ø40
Indexing time s 0,6
TAILSTOCK Type automatic, hydraulic
Quill taper MK4
Quill stroke mm 150
Tailstock travel mm 550
DRIVE MOTORS Spindle driven motor kW 15/18,5
Servo motors on X-/Z-axis kW 3/3
Hydraulic pump motor kW 2,25
Chip conveyor motor kW 0,2
Coolant pump motor kW 0,8
ACCURACY Positioning mm ±0,005
Repeatability mm ±0,002
MISCELLANEOUS Total power requirements 208-220V;100A;26kW
Dimensions (l x w x h) mm 4085 x 1749 x 1860
Machine weight (net) kg 5700
STANDARD ACCESSORIES OPTIONAL ACCESSORIES
Controller FANUC 0i-TC Controller FANUC 18i-TB
Spindle motor Fanuc α30P 15/18,5 kW Spindle motor Fanuc α 15/18.5 kW
Servo motors on X,Z: Fanuc α12 3/3 kW Hydraulic duty chuck on collet 
LCD display Automatic bar feeder
Hydraulic 12-station turret 8/10 station servo tool turret
Hydraulic lathe chuck Ø250mm soft and hard jaws Live tooling turret and C-axis
10 sets wedge boring bars holders Linear rolling guideways with telescopic guard
5 sets boring bar holders Ø40mm Foot pedal for tailstock quill control
7 pcs boring bar bushings (from Ø40 ~ on Ø8,Ø10,Ø12,Ø16,Ø20,Ø25,Ø32mm) Manual tool setter
3 pcs boring bar bushings (from Ø40 ~ on MK2, MK3, MK4) Automatic tool setter
Chip conveyor with chip cart Parts catcher
Coolant system with a tank Automatic open/close door
Coolant oil seperator Oil mist collector
Programmable tailstock with taper in quill MK4 ZF motor reductor
Foot pedal for hydraulic chuck Voltage stabilizer
Linear ball guideways with telescopic guard
Automatic lubrication system
End of program light
Lubrication gun
Transformer (415V; 3pH; 50Hz)
Fully enclosed splashing guard
Working lamp
Levelling bolts and pads
Tool kit
Operation manual
CE norms
Warranty (machine -1 year; FANUC - 2 years)