| TITLE | Unit | CS660X2000 | ||
| CAPACITY | Swing over bed | mm | 660 | |
| Max machining diameter | mm | Ø430 | ||
| Lathe centre height | mm | 330 | ||
| Bed width | mm | 400 | ||
| Max machining width | mm | 2000 | ||
| TRAVEL | X-axis |
mm
|
305 | |
| Z-axis |
mm
|
1930 | ||
| SPINDLE | Spindle speed | rpm | 7 ~ 2200 | |
| Type | D8 | |||
| Diameter of spindle bore | mm | Ø82 | ||
| 3-jaw chuck | mm | Ø250 | ||
| FEEDRATE | Rapid feedrate on X-axis |
m/min
|
6 | |
| Rapid feedrate on Z-axis |
m/min
|
10 | ||
| Type | slide guideway | |||
| TOOL TURRET | Type | electro, vertical | ||
| Tool capacity (pcs) | 4 | |||
| Tool change | s | 2,4 | ||
|
TAILSTOCK |
Type | manual | ||
| Tailstock quill taper | MK 5 | |||
| Tailstock quill diameter | mm | Ø75 | ||
| Tailstock travel | mm | 150 | ||
| DRIVE MOTORS | Spindle motor |
kW
|
7.5 (wtih variable-frequency drive) | |
| Coolant pump motor | kW | 0,8 | ||
| MISCELLANEOUS | Power requirement | kW | 30 | |
| Machine dimensions(w x d x h) |
mm
|
3830 x 1750 x 1700 | ||
| Weight (net) | kg | 2950 | ||
| STANDARD ACCESSORIES | OPTIONAL ACCESSORIES |
| Controller FANUC 0i-Mate-TD | |
| Spindle motor Fanuc 7.5 kW (inverter motor); wtih variable-frequency drive DELTA | |
| Automatic | |
| LCD display | |
| 3-jaw chuck Ø250mm with hard jaws | |
| 4- station vertical electric tool holder | |
| Steady rest 30-200 mm | |
| Follow rest 20-100 mm | |
| 2 handles for electric support | |
| Autonomous lubrication system for spindle | |
| Coolant system with tank | |
| Fully enclosed splashing guard | |
| Safety switch on doors with inner lock | |
| CE electric equipement | |
| Coolant system | |
| Antivibration machine lining | |
| Tool kit | |
| Transformer (internal) 380V, 50Hz, 3Ph | |
| Lubrication gun | |
| 90-degrees movable control panel | |
| Operation manual | |
| Warranty 1 year |