| TITLE | Unit | VC-AX630 | |
| MACHINE | CNC 5-axis machining center VC-AX630 | ||
| Controller: FANUC 0i-MF Plus (type 0); SVGA + AICC II(4-axis simutaneous + 1-axis positioning) | |||
| 2Gb CF card + iHMI | |||
| 10.4˝ color LCD display | |||
| Spindle motor: Fanuc Alpha iLT/12000i; 7.5/11/15 kW | |||
| CE specifications (EN-12417) | |||
| Warranty (FANUC components - 2 years ; mechanical components - 1 year ) | |||
| WORKTABLE | Built-in rotary table | mm | Φ 630 |
| Maximum workpiece diameter | mm | Φ 630 | |
| T - slots | mm | 100 x 18 x 5 | |
| Tilt/rotation speed | obr./min | 16.7 / 33.3 | |
| Distance from spindle to table surface | mm | 100-600 | |
| Max. table load | kg | 300 | |
| TRAVEL | X-axis travel | mm | 700 |
| Y-axis travel | mm | 500 | |
| Z-axis travel | mm | 500 | |
| Table tilt (B-axis) | -30° to 110° | ||
| Table rotation (C-axis) | 360° (0,001°) | ||
| SPINDLE | Spindle speed | rpm | 12000 |
| Spindle drive | direct drive | ||
| Spindle taper | BBT-40 | ||
| FEEDS | Working feed on X, Y, Z axes | mm/min | 1~20000 |
| Rapid feed on X, Y, Z axes | m/min | 48/48/48 | |
| TOOLS | Type | arm type A.T.C. | |
| Number of positions | 30 | ||
| Max. tool diameter (without adjacent tool) | mm | 125 | |
| Max. tool diameter (with adjacent tool) | mm | 76 | |
| Max. tool length | mm | 300 | |
| Max. tool weight | kg | 7 | |
| Tool change time(chip to chip) | s | 6 | |
| Tool change time (tool to tool) | s | 2.5 | |
| DRIVE MOTORS | Spindle motor | kW | 7.5/11/15 |
| Servo motor for X/Y/Z axes | kW | 7 / 4 / 7 | |
| Servo motor for B/C axes | kW | 3 / 1.6 | |
| DIMENSIONS, WEIGHT AND POWER SUPPLY | Power requirement | kW | 33 |
| Power supply voltage | 3 x 400V; 50 Hz | ||
| Min./Max. air pressure | 5.5-6.5 kg/cm2 | ||
| Machine dimensions (l x w x h) | mm | 4475 x 3581 x 3038 | |
| Machine weight | kg | 9000 | |
| STANDARD ACCESSORIES: | OPTIONAL ACCESSORIES: |
| Spindle with direct drive 12.000 rpm | High-pressure system for through-spindle cooling 14 bars + additional filter |
| Preparation for through-spindle cooling + rotary joint + motor with cooling capability through the spindle | Optical measuring scales on all axes (HEIDENHAIN) |
| Spindle oil cooler | Tool setting system Renishaw (TS-27R or OTS or RTS) |
| Oil seperator from emulsion | Workpiece measurement system Rensihaw (OMP ali RMP) + calibration sphere |
| Linear guideways on X-, Y-, Z-axes | Additional protective covers on top - splash protection |
| Chip conveyor (screw type) - ejection at a height of 365 mm | VICTOR - thermal compensation sensors |
| Manual handle operation (MPG handle) | |
| Gun for rinsing with emulsion + gun for blowing with air | |
| Tilting rotary worktable with T-slots | |
| Automatic lubrication system | |
| 30-position tool magaize (arm type A.T.C.) | |
| Heat exchanger for electrical cabinet | |
| Function M30 - automatic machine shutdown | |
| Chip rinsing system into the chip conveyor | |
| Fully enclosed working area with a cabin | |
| Preparation for hydraulic connection (4+1 outputs) on the rotary table (without hydraulic electro-magnetic valves) | |
| Signal light for program completion (three-color) | |
| Work light | |
| Leveling screws and bases | |
| Transformer | |
| Operation manuals + tool kit |
