| TITLE | Unit | JCL-60M | ||
| CAPACITY | Swing over bed | mm | 510 | |
| Max. machining diameter | mm | Ø320 | ||
| Max. machining length | mm | 320 | ||
| Slant angle of bed | 30° | |||
| TRAVEL | X-axis | mm | 170 | |
| Z-axis | mm | 360 | ||
| SPINDLE | Spindle speeds | rpm | 45 - 3500 | |
| Spindle type | ASA A2-6 | |||
| Spindle bore diameter | mm | Ø75 | ||
| Bar capacity | mm | Ø60 | ||
| Front bearing diameter | mm | Ø100 | ||
| Hydraulic chuck | mm | Ø160 | ||
| FEEDRATE | Rapid feedrate on X-axis | m/min | 16 | |
| Rapid feedrate on Z-axis | m/min | 20 | ||
| Slide way type | linear ball | |||
| AUTOMATIC TOOL CHANGER | ATC type | live tool VDI 30 | ||
| No. of ATC | 12 | |||
| Square tool shank | mm | 20 x 20 (25 x 25) | ||
| Boring bar shank | mm | Ø32 (40) | ||
| Tool to tool | s | 0,3 | ||
|
TAILSTOCK |
Tailstock type | manual (op. programmable) | ||
| Tapered bore type | MT4 | |||
| Tailstock quill diameter | mm | Ø65 | ||
| Quill travel | mm | 100 | ||
| DRIVE MOTORS | Main motor power | kW | 7.5 (op.15) | |
| Servo motors on X-/Z-axis | kW | 3 / 3 | ||
| Motor live tooling | kW | 2.2 | ||
| Hydraulic pump | kW | 1,5 | ||
| Motor of lubrication unit | kW | 3.5 | ||
| Chip conveyor | kW | 0,22 | ||
| Coolant pump | kW | 0,0035 | ||
| ACCURACY | Positioning | mm | ±0,005 | |
| Repeatability | mm | ±0,002 | ||
| MISCELLANEOUS | Power requirement | kW | 208-220V; 36kW | |
| Machine dimension (W x D x H) | mm | 2475 x 1605 x 1910 | ||
| Machine weight (net) | kg | 2900 | ||
| STANDARD ACCESSORIES: | OPTIONAL ACCESSORIES: |
| Controller Fanuc 0i-Mate-TC | Controller Fanuc 0i-TC |
| Servo main motor Fanuc 7.5 kW | Manual guide 0i function |
| Servo motors on X,Z: Fanuc 3/3 kW | Servo main motor Fanuc 15 kW |
| Monochrom LCD screen | 8-tools live tool turret VDI30 |
| Hydraulic unit | Collet chuck |
| Hydraulic chuck dia Ø160mm | Programmable tailstock with quill MT4 |
| 12- live tools turret VDI30 | Spindle air blast system |
| C-axis | Bar feeder |
| Live tool holder VDI30 axial | Parts conveyor |
| Live tool holder VDI30 radial | Parts catcher |
| Live tool holder VDI30 radial - short type | Oil mist collector |
| VDI holder for O.D. | Oil and coolant separator |
| VDI holder for boring bars | Stabilizer |
| Chip conveyor & bucket | Foot pedal for tailstock quill |
| Cooling system with high pressure pump and tank 120 l | Manual tool setter |
| Tailstock with quill MT4 | Automatic tool setter |
| Foot pedal for hydraulic chuck | Automatic open/close door |
| Auto lubrication system | |
| Alarm light for end of program | |
| Transformer(415V; 3Ph; 50Hz) | |
| Fully enclosed splash guard | |
| Cooling unit for electric cabinet | |
| Work light | |
| Leveling bolts and pads | |
| Tool kit | |
| Maintenance and operating manuals | |
| CE mark | |
| Warranty time (machine -1 year; FANUC - 2 years) |