| TITLE | Unit | Vturn-A260 (SM) | |
| MACHINE | Horizontal CNC Turning center-A260 (SM) | ||
| Controller 0i-TF Plus (type 1, ONG keypads), MGI + 2GB CF card | |||
| Color 10.4" LCD display | |||
| CE specifications | |||
| Warranty period: Mechanical components - 1 year, Fanuc components - 2 years | |||
| CAPACITY | Swing over bed | mm | Ø800 |
| Swing over carriage | mm | Ø620 | |
| Between centers | mm | Ø910 (950) | |
| Max turning diameter | mm | Ø480 | |
| Bar capacity | mm | 75 (opt. 91) | |
| Standard turning diameter | mm | Ø 400 (358) | |
| FEEDS | X-axis travel | mm | 240+80 (210+110) |
| Z-axis travel | mm | 750 | |
| E-axis travel | mm | 730 | |
| Rapid feedrate X/Z -axis | m/min | 18/24 | |
| SPINDLE | Max. spindle speed | rpm | 4200 (belt-driven) |
| Spindle nose | inch | A2-8 | |
| Spindle bore | mm | Ø87 (opt. 105) | |
| Inner bearing | mm | Ø130 (160) | |
| Spindle motor | kW | 15/18.5 | |
| SUB-SPINDLE (E-axis) | Max. spindle speed | rpm | 5000 |
| Spindle nose | inch | A2-6 | |
| Spindle motor | kW | 11/15 | |
| Inner bearing | mm | Ø100 | |
| Spindle bore | mm | Ø62 | |
| Bar capacity | mm | Ø52 | |
| TURRET | Number of tools | 12 | |
| Tool shank size | mm | 25 | |
| Max. boring bar diameter | mm | Ø50 | |
| Exchange time (T-T) | s | 0.3 | |
| Exchange time (including disk up & down) | s | 1.04 (adjacent); 1.45 (opposite) | |
| TAILSTOCK | Quill diameter | mm | N.A (digital) |
| Quill taper | MT#5 | ||
| Stroke (E-axis) | mm | 730 | |
| ACCURACY | Positioning accuracy | mm | 0.01 |
| Repeatability | mm | 0.004 | |
| MACHINE | Power requirement | kW | 31 (44) |
| Coolant tank capacity | liters | 360 | |
| Machine length | mm | 4528 | |
| Machine width | mm | 2616 | |
| Machine height | mm | 2335 | |
| Machine weight | kg | 7000(7200) | |
| STANDARD ACCESSORIES: | OPTIONAL ACCESSORIES: |
| Power chuck with soft jaws | Air conditioner for electrical cabinet |
| Programmable tailstock | Manual tool presetter (Renishaw) |
| Chip conveyor with cart | Auto tool presetter (Renishaw) |
| Fully enclosed splash guard | Parts catcher (swing type) |
| Hand-wheel | KITAGAWA hydraulic chuck |
| Tool holders (only for standard turret) | Auto door |
| Coolant flush on Z-axis cover | Bar feeder interface |
| 3 step warning light | Air blow system |
| Fanuc e-book | Higher pressure coolants |
| Oil skimmer | |
| Sub-spindle (Direct drive) | |
| Large spindle bore | |
| Fanuc manuals | |
| Hard jaws |